Our standard offer is as follows:

	1.The Greenhouse
Supplier	Rovero Rolso Pak
Origin	Holland
Model	Rovero 930 R-Eco
Structure	Galvanized pipes, 60mm diameter, 1.5mm wall thickness
Cross bars	Pipes of 32mm, flattened at both end
Connections	galvanized cross part, inserted in connection tubes (telescopic)
Plastic cover	Solar EVA-5 High Diffuse Film (Light transmission 92%, 5 years)
Plastic fixation	IMC film fixation profile in the ridge "Zig-zag" fixation profile on the first and last arch Roll-up tube on each side, with a simple crank, up to the ridge Tensioning belts on both side of every arch

	2.The Irrigation system
Origin	Various (Netafim, Rainbird, Dosatron)
Origin	Various
Composition	Main line - LDPE piping PN6 - diameter 32mm Laterals LDPE piping PN6 - diameter 16mm 1" short disc filter with 50 micron mesh Dosatron DI16 or Mix-Rite Fertilizer injectors Electrical pump with pressure switch Irrigation controller (Netafim or Rainbird) solenoid valves Pressure compensated drippers

	3.The production accessories
Plastic bags min. 15 L	2.5 plants per m2 - 35 x 25cm PE - 150 Microns
Supermat ground cover	Roll width 5.15m Prevents weed growth Stops root penetration, and keeps your greenhouse clean Light-proof material with optimum water-permeability Maximum UV-stability and has a very long life >4 years Cut to length free of charge. Custom sizes available
UV cord 6 mm	Used as crop support cable - 8 lines x GH length
Bobbins with 8 m twine	Same qty as plastic bags - hung on UV cord Combine to the clippers, ensures vertical crop guidance Plants can be lowered with one hand, without lifting the plants No tying, special integral slot at both ends of the twine Colour: white Material: UV stabilized polypropylene
Clipper	Ensure stem guidance - 10 units per plant Plant growth no longer restricted, thus increase in yield and quality Locks perfectly onto the twine, easy to use Colour: transparant or terra cotta Material: polypropylene
Truss support	Support of the first 2 to 4 truss - 4 per plants The U-model is pushed over the stem The U-model Flex* is flexible so it can be straightened out and placed on the stem The Hook-model is attached with the hoods at the ends of the stem
Top Hook	Optional - used for cucumbers Each top hook can guide several branches or stems Colour: white Material: UV polypropylen
Jiffy-7 seed trays	For seedlings - optimum root structure Easy Handling & Grading Fast, Easy, Flexible Transplanting Easy To Automate